The hydraulic distributor P80 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It is manufactured with up to 6 plungers with parallel or serial distribution.
The hydraulic distributor P80 is a mono-bloc distributor with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating.
The distributor is fixed with 3 (three) bolts M8.
|Viscosity||12 ...800 mm2/s|
|Filtration||10 to NAS 1638|
|Max operating pressure||315 bar|
|Back pressure||50 Bar|
|Nominal flow||80 l/min|
|Leakage(A,B-T)||18cm3/min at 120bar|
|Spool stroke||+/- 7 mm|
|Actuating force||< 220 N|
|Modification/ Spools||with 1 to 6|